12/24v Selectable
Stainless Steel Face Plate and Striker
Compact Cast Aluminium Body
35mm overall depth
Deep Jaw
Accepts 13mm latch bolt
Low Current Consumption
200mA - 12v DC continuous (±15%)
100mA - 24v DC continuous (±15%)
Simple Fail Safe/Fail Secure Changeover
Easy Installation
Stick on/Peel off template
Monitored and lipless versions available
Weather Resistant
IP56 Protection as Standard
Options
ANSI short and ANSI long faceplates
Extension lips – 15, 25, 50 and 75mm (pre-drilled strike body)
Spares
Replacement changeover pin
Approvals
EN61000-6-3:2007
EN50130-4:1995 + A1
EN50130-4:1998 + A2
EN50130-4:2003
AC Compatibility (with RM1)
The Rectifier Sounder Module enables operation with AC voltages.
The sounder can be set for either buzzing or silence with both AC and DC voltages.
The IEC RM1 unit is continuously rated – max 1 amp.
FAQs
Is there a charge for delivery?
Carriage and packing are included in orders over £250.00. A charge of £10.00 is made on lower value orders to cover carriage, packing and insurance. For deliveries to Ireland please speak to the office for pricing.
What warranty is there on electric door strikes?
6 years on the AL110, AL150 & AL2000 series electric door strikes. 3 years on the EL900 series door electric strikes.
How do I change AL110 electric door strike from PTL to PTO?
Locate the screw on the back section of the door strike. Remove this screw and in doing so, take care to keep the strike upright. Remove the barbell and relocate it the other way around. Secure this in place with the retaining screw.
Do you provide any weather rated access control products?
Yes, our AL110 and AL150 electric strikes are weather rated to IP56 as standard. We also offer IP68 rated keypads and exit switches.
What guarantees does Alpro give?
6 years for AL110/AL150/AL2000 series electric strikes
5 years for EMS1200 shearlocks/EB250 solenoid bolts/DB25 deadlocking bolts
3 years for EB1001 &EB501 electric bolts/door hardware
Are the electric door strikes AC compatible?
Yes, with the use of a rectifier, all strikes are manufactured DC compatible.
Are electric door strikes available in 12v and 24v?
Yes, all our electric door strikes are 12/24v selectable.
Has the holding force of the electric door strikes been tested?
Yes, independent test information is available on request.
Do you have any information on CE Marking or CE Marking of Doorsets?
Please refer to our technical section under Standards.