The advanced microprocessor module provides power reduction allowing for continuous operation without heat generation as well as automatic voltage regulation, dual monitoring and access control features.
The DB38 can be connected to advanced access control systems where logging and traffic reports are important which makes it the ideal solution for centrally controlled buildings. It provides feedback of both door and bolt positions which can be used in conjunction with a the security and access systems to fully monitor and control movement.
Surface mounting a lock and/or strike with the aid of a DB38 housing offers more flexibility in installation and makes securing glass doors possible. Dress plates are offered to give a ‘clean’ finish when a housing has been installed onto glass. Both the housing and dress plate are supplied with self-adhesive tape for instant application to glass doors and frames.
High Physical Security
Holding force 2,000kg - automatic deadlocking.
Bolt throw 14mm.
Robust Construction
All stainless steel bolt pin of 14.2mm diameter, linkages and springs. 3mm stainless steel faceplate and strike plates with fully enclosed mechanism.
Versatile Installation
Mortice mount horizontally or vertically, on single or double action doors.
Surface mount with the aid of the DB38 accessories, including mounting onto glass.
Physical Dimensions
203mm (L) x 37.5mm (W) x 44mm (D)
Faceplates
Square
Multiple Voltage Input
Any voltage from 12vDC-24vDC.
Thermal overheating protection.
Complete with built in transient and reverse polarity protection and continuously rated solenoid.
Low Current Consumption
Volts Current-Active Current Hold (after 200ms)
12vDC 1500mA 230mA
24vDC 1400mA 90mA
Dual Monitoring
Bolt and Door position switches
Built-in Access Control Module
Automatic unlock period - 0, 3, 6 or 9 seconds.
Multiple auto relock function - PTL.
Multiple unlock function - PTO.
Accessories
Strike box and housing kit.
Stainless Steel strike plate with square hole.
Glass surface mount kit dress plate.
Approvals
EN61000-6-1:2007
EN61000-6-3:2007
Built-in Access Control Module
Selectable unlock period - a field selector timer once the bolt is signalled to unlock. This enables traffic exiting 0, 3, 6 or 9 seconds in which to open the door before it automatically locks. See Anti-Tailgate.
Multiple auto relock function - when relocking the bolt makes 9 locking attempts over 18 seconds. Change in the Bolt Position Switch status indicates that the door has been locked. Fail open/PTL models only.
Multiple unlock function - in fail secure/PTO mode 5 attempts to unlock door at 2 seconds intervals.
Anti-Tailgate - once the door has been pushed open and closed during the chosen unlock period, the bolt will immediately relock.
FAQs
Is there a charge for delivery?
Carriage and packing are included in orders over £250.00. A charge of £10.00 is made on lower value orders to cover carriage, packing and insurance. For deliveries to Ireland please speak to the office for pricing.
What guarantees does Alpro give?
6 years for AL110/AL150/AL2000 series electric strikes
5 years for EMS1200 shearlocks/EB250 solenoid bolts/DB25 deadlocking bolts
3 years for EB1001 &EB501 electric bolts/door hardware
Do you have any information on CE Marking or CE Marking of Doorsets?
Please refer to our technical section under Standards.