Door Handle Fixing Information

All Alpro handles are supplied with their own dedicated fixing packs, which suit all the possible door materials available. Full fixing and maintenance instructions are included in the handle kits, to ensure the correct methodology is employed when fixing the handles. In the event of the fixing kits being mislaid or broken, replacement kits are available by contacting the Alpro sales office on 01202 676262 and specifying the necessary requirements.

F17											F18
39-54mm thick doors For 32mm Ø Impressionist handles For 25, 32 & 38mm Ø Functional 98 series handles M12-70mm countersunk											55-85mm thick doors / 32mm Ø Impressionist handles For 25, 32 & 38mm Ø Functional 98 series handles M12-95mm countersunk For black cover cap - F18BLACK
F19											F20
39-54mm thick doors or 32mm Ø Impressionist handles For 25, 32 & 38mm Ø Functional 98 series handles M12-90mm with M6 grub screw											55-85mm thick doors or 32mm Ø Impressionist handles For 25, 32 & 38mm Ø Functional 98 series handles M12-120mm with M6 grub screw
F21											F22 Secret Fixing
Glass doors For 32mm Ø Impressionist handles For 25, 32 & 38mm Ø Functional 98 series handles M12-55.5mm with M6 grub screw											For fixing to a wooden door 25mm deep For 32mm Ø Impressionist handles NB - Use these fixings for timber doors only (This fixing is not recommended on Aluminium doors)
F25.2KIT											F26
Glass doors (Single side) For Impressionist handles For Functional 98 series - single side glass fixing 2 x 90mm XM12 bolts Snake eye fixing 25mm head x 5mm thick											39-54mm thick doors For 32mm Ø Impressionist handles For 25, 32 & 38mm Ø Functional 98 series handles M12-70mm countersunk with dome cap NB - Cover cap is available in black on request
F27											F28
10mm Ø clearance hole required For Functional 97 Series handles Suitable for back to back pairs and single handles											10mm Ø clearance hole required For Functional 97 Series handles Suitable for back to back pairs and single handles
F29											F34
Minimum 11.5mm Ø clearance hole required, maximum 12mm For Functional 97 Series handles Suitable for back to back pairs and single handles											M12 fixings For 32mm Ø Impressionist handles For 25, 32 & 38mm Ø Functional 98 series  handles M12 x 25mm long hexagon headed bolt grade 8.8.
F38
For Functional 97 Series handles only M6 x 20mm long countersunk bolt and 4 off No. 8 x 25 long wood screws