Round mortice cylinder deadlocks provide security deadlocking for a variety of aluminium doors including swinging and sliding applications.
The hook bolt is constructed from stainless steel and is a 5 ply laminated construction, with the centre core case hardened, complete with hardened roll pin to resist hacksaw attack. All locks are designed to accept standard profile cylinders or thumbturns.
Deadlocks accept standard 1 5/32" mortice key or thumbturn cylinder.
Faceplates
Flat faceplate - width 25mm
Radius faceplate - width 25mm
Radius faceplate with weather strip - width 25mm
Finish - SAA
Conversion Chart
Imperial Backset |
Metric Equivalent |
Dimension A |
7/8" |
22.2mm |
39.9mm |
31/32" |
24.6mm |
41.4mm |
1 1/8" |
28.6mm |
45.2mm |
1 1/2" |
38.1mm |
57.1mm |
FAQs
Is there a charge for delivery?
Carriage and packing are included in orders over £250.00. A charge of £10.00 is made on lower value orders to cover carriage, packing and insurance. For deliveries to Ireland please speak to the office for pricing.
Do the hookbolts, barbolts etc come complete with faceplates?
No you have to order them separately.
If side loading of the lock is an issue what can I do?
Usually if the lock is under side load there could be a problem with the overall door set up. Advice should be sought from the manufacturer/installer.
How do you work out the backset of hook bolts?
It is from the centre line of the cylinder aparture to edge of the faceplate.
How do I work out the handing on my door?
With the door opening towards you, look at which side it is hung/where the hinge is and that denotes whether the door is left or right handed. Therefore LH hung door requires a RH latch and a RH hung door requires a LH latch.
Do you have any information on CE Marking or CE Marking of Doorsets?
Please refer to our technical section under Standards.